Complete Guide on Arlo Camera Setup and Arlo Camera Offline Troubleshooting

Currently, the security of home and office is a prime focus of owners. In such a situation, Arlo security is one of the ideal devices. 

The crime rate sees a massive decline after they have installed a security camera. The plethora of CCTV manufacturers visible in the market and provide an advanced feature that ensures your property’s security. The Netgear Arlo camera is a leading security camera supplier and has the edge over other camera distributors in the market.

The features and performance of this Camera are unmatched and meeting the requirement of customers. We are giving details about the Arlo camera setup guide from starting.  

Before starting the Arlo camera setup, make sure to keep the following things in your mind. 

• Before Arlo camera setup, the following points need to keep in mind:
• No obstruction should be present between the Arlo camera and the base station
• Make the sure distance between the base station and router must not surpass 40 meters
• Sometimes one or more access point near to the base station leads to Wi-Fi conflict. Keep your other Wi-Fi device to stay away from the base station.

In case if your Arlo Camera Offline issue happens then, you should take some essential steps below:

Remove the battery from Arlo camera and then place again and see for Camera LED status

If LED is solid green, then it indicates the base station is linked to the internet successfully.

If LED doesn’t blink, make sure that the battery is placed in a correct place properly and also the battery is not low.

Even if the fully charged battery is not responsible for LED doesn’t light up, then it may be because of Arlo camera settings turned off.

Log out from your Arlo account and then login again. 

If you find the message Arlo base station offline,’ then it means the base station is not attached to the internet. 

Connect Arlo base station with the internet properly. After seeing the LED status, if it turns Green, then the base station is set up. 

Now ready to sync Camera with the base station. push the sync button present on camera and wait for the blue LED. When blue light flashes, then the camera sync process is complete, and the Camera is ready to monitor.

Source URL: