When
you are not at your home, and you want to see your security videos. Suddenly,
you know you Arlo security camera gets offline. So, you do not need to be
panic, by taking an Arlo
Technical Support you can troubleshoot your camera in a few minutes.
The troubleshoot steps are-
●
When you
have your security camera offline after switching into a different router or
after making changes to the internet network. You need to release & press
the Sync button at Arlo Base Station or
Arlo Smart Hub.
When you see the Internet LED blinks
approx ten seconds, then your security camera starts the normal operation
again.
●
While
you are opening & closing your security camera battery door then you need
to note the LED behavior when the camera gets off:
1- When the LED light is not working.
Then, you need to check to ensure the camera’s batteries are placed in the
right orientation. Review to ensure that your camera batteries are not totally
dead.
2- If you see the LED rapidly binks
blue- Then your security camera has synced from the base station.
3- In case, LED once again blinks blue-
That time, you should resync the camera from the base station.
In case, you think is
information is not sufficient for you, then you can get valuable information
from this security system, experts via Arlo Pro Support
. The very security system.
0 Comments