If you are looking for setting up Arlo Pro or Pro 2 security cameras with Arlo base stations, these instructions allow you to do so and cater to your needs effectively. Below listed steps will help to sync Arlo Pro or Arlo Pro 2 security cameras:
· First off, you need to open the battery section by just pulling back smoothly.
· Insert the battery in a proper manner and then close the compartment tightly.
Bring the Arlo Security Cameras you want sync nearby the base station.
Sync the Arlo Pro & Pro 2 camera to the base station:
- If you are making use of an Arlo base station, you are required to press the Sync option (located on the side of the base station) for a few seconds and then release it.
(Note: Pressing the Sync button for a long time will allow the LED under the USB symbol to blink and block the sync process.)
- If you are making use of an Arlo Pro or Arlo Pro 2 base station, you need to press the button (appear on the top of the base station) for few seconds and then you have to release it.
- Once you are done lock, stock, and barrel, wait for LED to blink green.
- Press the Sync button of the camera you are using for a couple of seconds and then release it gently.
- A blue LED starts blinking in a rapid manner which will confirm the sync process.
If the LED blinks amber, it is a clear indication that the sync process is not completed or failed. It would be good to repeat the process again in a proper manner. If it not works, ask for help from experts. In order to get in touch with them, you need to give a call at Arlo Security Camera Phone Number and get the solution, right from the comfort of your home. Luckily, they are available 24/7 round the clock so you could approach them at any time even in odd hours.
0 Comments